Salt Water Aquarium Supply Milwaukee

salt water aquarium supply milwaukee

As promoters of ideas to general audiences, there are reasons for forwarding generalizations about how big is big enough and hence I have oft-stated (and stand by) my suggestion that forty gallons is a good minimum for a beginner marine system. This is large enough to provide living space, allow for landscaping and grants enough leeway should the "power go out", something die, overfeeding occur

Smaller systems are inherently less stable, more prone to crash, less flexible functionally and esthetically. Plus, surprising to some, no real cost-savings per gallon

.. use Silicone). There are a myriad of options to choose amongst, doing with solvent density, color... and possibly the use of a primer. I strongly encourage (along with good, square cuts and new/er, clean pipe and fittings) the use of "landscape" PVC solvent... like the green viscous kind/s or best "Christys Red Hot Blue Glue"... which works well even in wet, dirty (under tank) environments.

I am forever telling folks to "work from the fixed end" in doing plumbing work... after carefully measuring, cutting, laying out the parts and cut pipe, to thread, solvent all from the most fixed point (like a wall or a pump or a tank...) on out. Use pap

VHO still holds one advantage over their competitor, Power Compact lamps, in that the lamps distribute light better over a greater area.

Power Compact Fluorescent

In our opinion, Power Compact bulbs are one of the most valuable innovations in the aquarium hobby in recent years. Power Compact bulbs consist of U-shaped fluorescent tub

On the plus side they are small, powerful, and inexpensive. On the negative side, my experience has shown these pumps to be unreliable and potentially dangerous. I have had a number simply fail to operate after just a year or two of service. Worse yet, I have also received mild shocks from a couple of these pumps. The potential for electrocution was the final straw. I systemically went through my customers tanks and replaced all the Rio pumps with comparable ones from other manufacturers. This was both a liability and cost-effectiveness issue. I can easily replace and bill a customer

Placement of the manifold at or slightly below the water surface (the nozzles at least) reduces or eliminates any issues with salt creep or salt spray.

Tapped into the manifold ring we need multiple tees, angled slightly downward as a good-sense precaution in case the nozzles leak or become "liberated". The placement of these tees is not of much critical concern as long as you have enough in total to work with; the ability to manipulate water flow through any of them is very flexible and efficient. Ill suggest 4 to 6 teed outlets per 100 gallons of tank volume, spac

Why Do My Fish Hide All The Time?
Fish that hide all the time are a baffling and frustrating problem for the owner. Here are suggestions for how to coax your fish out into the open where you....