Make An Reptile Pond Aquarium

The two parts are usually connected using nylon bolts and nuts. On most models, water overflows into the waterfall cup from the water surface in the aquarium. A siphon tube delivers water from the waterfall cup inside the tank, over the side of the aquarium, and into the prefilter box. The water then passes through a sponge prefilter element, and feeds via gravity, into the filter below the aquarium. Some hang-on prefilters are of the "continuous-siphon" type. These prefilters actually have a built-in channel which allows the water to travel over the side of the tank without us

The stand upon which the tank sits is to be as close to perfectly level (planar) as possible with a tolerance of mere fractions of an inch (a few mm). Imbalanced tanks can place undue pressure on a side or seam and cause a leak. Irregular surfaces (knots, divots, fastener heads poking up, etc.) can cause pressure points and lead to a crack in the glass or acrylic. Likewise, the posts and pillars of the stand should make a large footprint to distribute the weight of the aquarium. Narrow legs or excessive shims c

Smaller fish are simply very young specimens that are going to grow. As they grow in the overstocked aquarium, one fish will die at a time, until the population balances out with the limits of the environment. Keeping more specimens together that STAY SMALL as adults may work, but it is impor

erhaps even an engineered or DIY tower of some sort? How big is your pump? Where should it be placed? What about sizing the tubing to/from it? Should you leave open/space for adding other discharges, returns for a sump/refugium later?

All these issues and more should be considered before even buying your tank... as both glass and acrylic models can be custom-ordered/made and the former are much easier to drill/fit for lines before assembly. Check with your dealer or fabricator r

This can take days or weeks depending on if you want to take steps to "speed it up" just want to wait for the beneficial microbes to "fall in" and situate themselves.

"Used" filter media, substrate from a disease-free "clean" system may be used to bring in these bacteria, as well as numerous commercially prepared cultures for sale through pet-fish outlets.

As a provision for preventing poisoning from "new-tank syndrome" is use

Cleaning Under Your UGF
If you've ever considered tearing down your under gravel filter, just to clean the junk out from under the plate, here is a tip you'll enoy. ....

phosphates too high
hello again- Well my 90 gallon predator/reef tank has been up in running for about 7 months. Everything is running smoothly so far- water parameters are nitrate > 20 ppm, nitrite 0ppm, ammonia 0 ppm, pH 8.2, salinity 1.025, but phosphates are way to high it's about 5 ppm. For the past two weeks....

Blue Algae , cyanobacteria

Blue Algae ( cyanobacteria )

Most aquarium hobbyists know and fear this type of algae, well actually it's the organism cyanobacteria. The appearance of the blue algae is often a slimy blue green carpet, quickly spreading throughout the aquarium surfa.

Anyone use Quiet One 3000 or SEDRA 7000 submersible pumps?
Howdy, Anyone have any user feedback on these pumps? Reliable? Noisy? I'm looking for a potential replacement for a finicky and LOUD MAG7. This is for a Remora Pro by the way. Thanks!.