Periwinkle Snail Aquarium

Anyhow, establishing an adult pair can be a little tricky; and you need to keep your eyes on them to ensure that the female doesnt kill the male.

The next thing is about setting up the tank. The tank should be large enough, approximately 200 liters for the breeding pair. It is better to let the pair be alone in an aquarium when trying to spawn clownfish.

The rest of the aquarium should be decorated with a nice anemone, a few live rocks, and other rocky substance with a vertical surface, a layer of coral sand on the bottom, br

.. by bushing up the lines here.

2) Practically speaking there is no "too large" overflow line size or number of overflows themselves. If you think 1" diameter through puts will do, go with 1 1/4" or even 1 1/2". Think you can get by with one overflow line of large/r diameter? Use at least two overflows... trust me here... as one is very likely, make that VERY likely to fail, get clogged, blocked by any number of circumstances, events. Systems of more than a hundred or so gallons should have at least three overflow lines... Ive seen very big tanks with numerous overflow lines

At this point you can safely install your first cool water livestock.

Water Changes:

Should be done more frequently and with larger volumes, a minimum of twenty five percent change out per month.

Metal Poisoning:

I dont know why cold water systems seem to suffer more from this type of toxicity more than tropical, but aquarists seem to introduce metal; contaminants in decor, substrat

periwinkle snail aquarium

The aquarium should be placed in an area where there is minimized environmental fluctuation; away from windows, heaters, etc. Being in the line of frequent foot traffic is no problem; the livestock will quickly adjust and respond.

Before setting up your tank it should be cleaned with appropriate tools and materials. Soaps, detergents and ammoniat

.. use Silicone). There are a myriad of options to choose amongst, doing with solvent density, color... and possibly the use of a primer. I strongly encourage (along with good, square cuts and new/er, clean pipe and fittings) the use of "landscape" PVC solvent... like the green viscous kind/s or best "Christys Red Hot Blue Glue"... which works well even in wet, dirty (under tank) environments.

I am forever telling folks to "work from the fixed end" in doing plumbing work... after carefully measuring, cutting, laying out the parts and cut pipe, to thread, solvent all from the most fixed point (like a wall or a pump or a tank...) on out. Use pap

Reply to tips for aquarium shots?

funfishtank.com posted a reply:

Dark room. Lights on in tank.

Use a tripod if you got one.

Experiment!

.

Scratched Glass
Most of us have run into this problem at one time or another. Care to share your experience with scratched glass? "Does any one know how to fill some scratches....