Tank Aquarium Mollies

This can take days or weeks depending on if you want to take steps to "speed it up" just want to wait for the beneficial microbes to "fall in" and situate themselves.

"Used" filter media, substrate from a disease-free "clean" system may be used to bring in these bacteria, as well as numerous commercially prepared cultures for sale through pet-fish outlets.

As a provision for preventing poisoning from "new-tank syndrome" is use

A basic plenum may be created by suspending egg crate material or under gravel filter plates above the aquarium bottom, using inert supports such as PVC pipe. If egg crate is used, it is covered with nylon screening over which the deep gravel bed is placed. The actual materials, including what grade of gravel or sand is used, vary depending on what literature you read, but usually coarse live sand, fine coral gravel, or a combination of both are used. One technique is to use 2" of live sand on the bottom,

It simply slips on over the output and using a variety of gears and the pressure of the water flow of the powerhead it converts that straight jet of water into a revolving, diffuse flow of water. As a test, I ran one of these on a Maxi-Jet 1200 for one month without a prefilter in my 120 gallon reef display before it failed to operate. I then removed it, gave it a quick cleaning, reassembled, and it was performing as good as new again for another month before it required being cleaned again. The entire maintenance procedure could not have taken me

Run the pumps for another 15 minutes in this mixture. Disassemble and scrub and rinse all the individual parts before placing the pumps back in the tank. After all of this, your powerheads should look and run just like brand new.

Conclusions

Powerheads are usually the silent workhorses of our aquariums. Good ones perform their function of powering filters or providing circulation while requiring little maintenance other than a good cleanin

1) Commit! Decide you are going to spend the $$ it takes to make a proper go of it. At a minimum, most tanks, (from 10 gal to 55 gal) take between $250 and $500 to get going. Can you do it cheaper? Yes, but usually not your first one. You have to know what you are doing and understand how things can and will go wrong before you can choose less expensive husbandry options and/or equipment. Save up if you have to, but count on that first tank being expensive.

Realize that this is not a short term commit

New Corycat Group

elpono_njg posted a new topic:

Come one and all, your corycat pics here...