Lifeguard Aquarium Products

They are designed to run 24/7. This constant on and off can damage or destroy some powerheads. I would only use Aquarium Systems or Hagen powerheads for this type of usage. Even such, occasionally these powerheads will make a brief chattering noise when first turned on. This can be annoying to some individuals, so be aware. Check out this link for more:

http://www.wetwebmedia.com/ca/cav1i4/power_heads/Power_Heads.htm

Hydor Flo Rotating Deflector:

This is another wavemaker that I like, although it functions in a completely different manner than the Aquarium Systems Natural Wave. This device is an add-on feature to a powerhead

.. w/o spills, drips, salt-creep, continuous checking and repairs, too-much induced drag... Few actual arrangements come very close to achieving these ends. The following notes, suggestions and examples will hopefully help

I went to remove and clean it again, when it broke coming off. It then went into the trash, and that was the last time I used anything with the Rio name on it, having had several bad experiences with their powerheads as well. For more information:

http://www.wetwebmedia.com/ca/cav1i4/power_heads/Power_Heads.htm

It is a good idea on paper, and is very similar in operation to those old-style rotating spray bars that came with the first wet/dry filters. These would routinely clog as well and

includes species that only seem to survive in an aquarium when kept in large shoals (schools), and those that are collected from deep water, often improperly

Rare: Folks! If it is next to impossible to FIND a fish in the wild, collecting that species is a sure-fire way to drive it into extinction! To us, keeping these species is very irresponsible. We have two words for people that disagree with this . . . BITE ME!

Please note that some species may be on the list for more than one or more of these reasons, but not all reasons are shown due to space limitations. In our opinion, one or two reasons alone are enough to avoid that species, unless

.. Believe me, "been there, done that"... too many times!

Maybe youre really familiar with a CAD-CAM computer program, but most folks do fine with quadrille paper (for estimating size) a pencil, straight-edge and a BIG eraser. Draw out the basics of your main/display tank, any sumps, reservoirs, refugiums you intend, how they will likely be juxtaposed (measuring and drawing their dimensions as well as stands/supports), AND THEN consider how and where they might best be joined by plumbing.

Lifeguard Aquarium Products

Angel Fish Pterophyllum altum (back) & scalare (front)